Model: LNK-SPL01
Overview
LNK-SPL01 series is an Industrial Grade, Gigabit Ethernet, PoE Splitter, designed to deliver data, via RJ-45 Ethernet connector, and electrical power, via screw terminal block, to non-PoE devices. This device saves the high cost of running separate electrical service to edge devices.
The LNK-SPL01 acts as PD equipment and can be powered by standard PoE IEEE802.3af/at PSE (Power Source Equipment) switches or work when paired with LNK-INJ301 PoE Injectors. The data transmission, up to Gigabit speeds, with power output voltages of 12VDC, run simultaneously up to the Ethernet limit of 100 meters. Simple settings of the LNK-SPL01, make it a plug and play device, requiring no tools or software configuration, and provides ease of use, with flexible installation and high reliability.
With 2-port RJ45 data output, LNK-SPL01 can be function as switch. With dual power input (PoE input + 12VDC input), the PoE splitter can work when there is no PoE input, that is to say, LNK-SPL01 can automatically recognize the power input (default in PoE input, switch to 12VDC input when PoE not work).
Features
► Splits power and data from PoE Input
► 1-port PoE Power+ Data input
► 2-port Data output (Switch function)
► 1 DC Out + 1 DC In (5-pin Terminal Block)
► Able to work with 12VDC input no PoE
► Support IEEE802.3af/at PoE
► Support 10/100/1000Base-TX
► Distance up to 100 meters
► Supports output power up to 20W
► 12VDC output voltage
► Short-circuit protection for power output
► IP40 rugged metal housing and fanless
► Support DIN-Rail & Wall-mount installation.
► Extensive LED indicators for PoE diagnostics
► Wide operating temperature -40 ~ 80°C
Technical Indexes
| Ethernet |
| Standards: | IEEE802.3af Power over Ethernet |
| IEEE802.3at Power over Ethernet |
| Processing Type: | Forward |
| Half-duplex, Full-duplex |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) |
| Cabling: | 1000Base-T: Cat5 or above |
| Maximum Distance: | Cat5 UTP up to 100m |
| Connector: | 2x RJ45 |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical |
| Output Power: | 20W/12VDC (Terminal Block) |
| Power Consumption: | 25W Max. |
| LED Indicators: |
| PoE In: | PoE PSE Power In |
| 12V: | DC 12V Output |
| Dimensions (WxDxH): | 95 x 70 x 30 mm |
| Weight: | 0.25Kg |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail / Wall-mount |
| Regulatory Approvals |
| ISO9001 |
| FCC part 15, Class A |
| EN55022:2006+A1: 2007 Class A |
| Surge Protection: |
| RJ45: 1KV |
| Power: 500W |
| ESD: 4KV/8KV |
Ordering Information
| Model | Description |
| LNK-SPL01 | Industrial PoE splitter with 2-port Switch function: 1-port PoE+ In + 2-port Ethernet Data Out (switch function), maximum output of 20 W at 12VDC, Support DIN-Rail mounting and Wall mounting installation, -40 to 80°C operating temperature |
| Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |
| Power Options | ► 20W 12VDC output with 2-pin open wire terminal block |
